Lantronix EO2Px Series

Lantronix Ethernet Over 2-Wire Extender With PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG unshielded twisted pair (CAT 5, CAT 3 and other twisted 2-wire phone wire) cabling infrastructure to extend the Ethernet network at half Gigabit speeds and provide data and power to IP devices in remote locations, saving time and money over installing new cable.

The Ethernet Over 2-Wire Extenders With PoE+ are used in pairs, with a local device at one end and a remote device at the other end of the copper link. The extenders provide flexibility for connecting to either copper or fiber Ethernet network equipment. The Local device offers a 10/100/1000Base-T RJ-45 and 100/1000Base-X open SFP combo port and a RJ-45 or 2-wire terminal block connection to provide safety extra low voltage (SELV) power over UTP or twisted 2-wire to the Remote device. The Remote device receives power through the RJ-45 or 2-wire terminal block connection and provides a 10/100/1000Base-T RJ-45 output with PoE+ power or a 100/1000Base-X open SFP combo port connection for IP cameras, wireless access points or other PoE powered end devices.

Power for the Local device can be supplied through a properly isolated +48VDC power source or through the designated 90 Watt power adapter. Power for the Remote device can be supplied with PoE from the Local unit, through a properly isolated +48VDC power source, or through the designated power adapter for providing redundant power or for additional power requirements at the Remote device.

The Ethernet Over 2-Wire Extenders With PoE+ are supplied with a web GUI, which allows password-protected access to various configuration options of both the Local and Remote devices through a single IP address. It also allows easy upgrades to firmware.

Perfect For:
The Ethernet Over 2-Wire Extenders With PoE+ allow utilization of existing 2-wire cabling infrastructure for:

• Conversion of analog surveillance systems to IP-based cameras
• Extending network connectivity and power to IP devices in remote locations
• Bridging between two networks using a 2-wire infrastructure

Top Features

• Half Gigabit Communication Speeds
  
  • Provide sufficient bandwidth for many different applications
• IEEE 802.3af/at Compliant Remote PoE+ Ports
  
  • Ensures compatibility with other IEEE 802.3af/at compliant PoE/PoE+ powered devices and provides full PoE+ to camera or other remote IP devices
• PoE+ End Device Classification
  
  • Extenders use proprietary UTP end device classification to prevent unintended powering of other remote devices
• Auto Power Reset
  
  • PoE+ connected device can be monitored and power cycled/rebooted in the event it becomes unresponsive, eliminating the need to dispatch service technicians for simple power resets
• Copper and Fiber Connections
  
  • Gigabit copper and SFP combo port connections provide network connection flexibility
• SELV Power over 2-Wire
  
  • Eliminates need for electricians and power outlets at the remote location, allowing for maximum flexibility on the location of remote devices
• User-Friendly Web GUI
  
  • Both the Local and Remote devices can be configured and managed through the included web GUI using a single IP address

Specifications

Ordering Information

Note: Local and Remote must be used as a pair. A properly isolated power source is required for each Local unit and an external power supply is optional for Remote units depending on power requirements.