Lantronix XPort
Embedded Device Server
Especificaciones
Descripción
Más informaciónes
Productos similares
Imprimir esta pagina
Solicitar Precios
Ensenarme mis notas
PDF
Especificaciones
Descripción
Más informaciónes
PDF
- Minimal engineering effort required to web-enable virtually any electronic device
- Remote command and control of edge devices
- 256-bit AES encryption for secure communications
- EM C/EMI -compliant; RoHS-compliant
- Everything you need - all in a single RJ45 package
Build Serial to Ethernet Connectivity and Control into Your Products, Quickly and Simply
XPort is a compact, integrated solution to web enable virtually any device with serial capability. By incorporating XPort into a product design, device manufacturers can quickly and easily offer network connectivity as a standard feature ? so equipment can be accessed and controlled over the network.
Full Networking in a Tiny Package
XPort embedded Ethernet device server removes the complexity ? of designing network connectivity into a product by incorporating all of the required hardware and software inside a patented innovative package. Smaller than your thumb, it includes all essential networking features, including a 10Base- T/100Base-TX Ethernet connection, proven operating system, an embedded web server, e-mail alerts, a full TCP/IP protocol stack, and 256-bit AES encryption for secure communications.
Integrated Network Communications Module
XPort is powered by our DSTni network processor SoC, which includes a 10/100 MAC/PHY and 256 KB of SRAM. It features a built-in web server for communications with a device via a standard Internet browser. Web capability can be used for remote configuration, real-time monitoring or troubleshooting. XPort has 512 KB of onmodule Flash for web pages and software upgrades. It acts as a dedicated co-processor that optimizes network activities permitting the host microprocessor to function at maximum efficiency.
Robust, Feature-Rich Software Suite
Eliminating the need to develop or license a networking stack, XPort incorporates:
- Robust Real Time Operating System (RTOS)
- Full-featured network protocol stack
- Built-in web server for device communication and configuration via a standard browser
The Windows-based DeviceInstaller tool makes configuring one or more XPorts in a subnet quick and easy.
- Install and configure XPort and load firmware
- Assign IP & other network specific addresses
- Load custom web pages and view specific device data
- Enable web-based configuration of the device
- Ping or query the attached device(s) over the network
- Allow Telnet communication with the device(s)
XPort Tech Specs
| Serial Interface | |
| Interface: | CMOS (Asynchronous, 5V Tolerant) |
| Data Rates: | 300 bps to 921,600 bps |
| Characters: | 7 or 8 data bits |
| Parity: | Odd, even, none |
| Stop Bits: | 1 or 2 |
| Control Signals: | DTR/DCD, CTS/RTS |
| Flow Control: | XON/XOFF, RTS/CTS |
| Programmable I/O: | 3 PIO pins (software selectable) |
| Network Interface | |
| Interface: | Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
| Connector: | RJ45 |
| Protocols: | TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP |
| Indicators (LED) | |
| 10Base-T connection | |
| 100Base-TX connection | |
| Link & activity indicator ? Full/half duplex | |
| Management | |
| SNMP,Telnet, serial, internal web server, and Microsoft Windows®- based utility for configuration | |
| Security | |
| Password protection | |
| Optional 256-bit AES Rijndael encryption | |
| Internal Web Server | |
| Storage Capacity: | 384KB for web pages |
| Architecture | |
| CPU: | Based on the DSTni-EX enhanced 16-bit, 48MHz or 88MHz, x86 architecture |
| Memory: | 256KB SRAM and 512KB Flash |
| Firmware: | Upgradeable via TFTP and serially |
| Power | |
| Input Voltage: | 3.3 VDC |
| Environmental | |
| Operating Temperature Range: | -40° to 85°C (-40° to 185°F) |
| Storage (Non-operating): | -40° to 85°C (-40° to 185°F) |
| Packaging | |
| Dimensions: | 33.9 x 16.25 x 13.5mm (1.33 x 0.64 x 0.53 in) |
| Weight: | 9.6 g (0.34 oz) |
| Included Software | |
| Web manager, Windows®-based DeviceInstaller configuration software and Com Port Redirector. | |
XPort Evaluation Kit
The XPort Evaluation Kit includes everything you need to integrate the XPort into your next product design, including:
- An XPort Evaluation Board and reference design including CAD PCB files and complete BOM
- Universal AC power adapter
- Network (CAT5) and serial cable
- Connector adapter
Ordering Information
| Part Number | Description |
|---|---|
| XP1001000-05R | XPort XE Min. Quantity: 50 Units XPort RoHS Extended Temperature, without Encryption |
| XP1001000M-05R | XPort XE RoHS Extended Temperature,
with MODBUS, without Encryption XPort SE Min. Quantity: 50 Units |
| XP1002000-05R | XPort RoHS Extended Temperature, with Encryption |
| XP100200S-05R | XPort RoHS Extended Temperature, with Encryption- Sample |
| XP10010NMK-01 | XPort Evaluation Kit, with Encryption |
| XPPDK1000-LNX-02 | XPort Pro Linux Development Kit |
Los clientes que han visto este artículo también vieron