Advantech APAX-5090

The APAX Remote I/O series communication modules are designed for control markets because of their high density I/O points, flexibility, scalability, and hot-swappable functionality and also variety I/O selections. The APAX Remote I/O communication modules can support a variety of protocols, including PROFINET, CANOpen, Modbus/TCP and Ethernet/IP, users can build their APAX remote I/O system with specific protocols to fulfill the remote I/O needs of existing PLC market and any control markets.

Specifications

General


Certification
CE, FCC class A

Interface
COM 1, COM 2: RS-232/422/485*
COM 3, COM 4: RS-232/422/485* *
Change Mode with the switch

Connectors
1 x 26-pin clamp-type terminal

Dimensions (W x H x D)
30 x 139 x 100 mm

Enclosure
ABS+PC

Weight
180 g

Power Consumption
2 W @ 24 VDC (typical)

LED Indicators
TX, RX

Supported OS
Linux Kernel 3.18 (Ubuntu 14.04)

Operation Mode
Virtual COM

Bus Connector
APAX (EtherIO)



Communications


Data Bits
8

Stop Bits
1, 1.5, 2

Parity
None

Baud Rate
600bps ~ 115.2 kbps

Data Signals
RS-232: TxD, RxD, GND
RS-422: Tx+, Tx-, Rx+, RX-
RS-485: Data+, Data-

FIFO
256 bytes

Maximum Support
Up to 8 pcs with one controller



Protection


ESD Protection
8KV (air), 4KV (contact)

EFT Protection
2,000 VDC (Power Line)

Isolation Protection
2,500 VDC (between COM port and backplane)



Environment


Operating Temperature
-10 ~ 60°C (mounted vertically)

Storage Temperature
-40 ~ 70°C

Relative Humidity
5 ~ 95% RH (non-condensing)

ORDERING INFORMATION

Available Modules
APAX-5090	4-port RS-232/422/485 Virtual COM with APAX Bus

Note: APAX-5090 can only supported by EtherIO architecture (non-DSP).ex. APAX-5580+APAX-5402L