Option CloudGate Telematics Card
CONNECTING THINGS to the Cloud
- Adds flexible I/O and connectivity for industrial telematics applications to CloudGate
- Built in 3 axis accelerometer for movement detection and other applications
- Dual SIM card reader for backup or roaming SIM
- Built in microcontroller offloads all I/O from CloudGate
The Telematics Card allows the CloudGate Intelligent M2M Gateway to be used in advanced industrial telematics applications. The board can accept a range of Option or 3rd party developed I/O expanders that match the card and I/O connector to specific applications.
The base card (CG1106) adds a 3 axis accelerometer with hardware motion detection, dual SIM slots for a backup or roaming SIM card as well as the primary SIM card, USB and USB on the go ports and a DTE DB9 serial port with power over serial support.
The optional I/O expander piggy back board exposes a range of different I/O options including a second serial port, analog and digital inputs and digital outputs. Using different I/O expanders different levels of isolation and voltage ranges can be achieved. I/O Expander including CAN bus is also available. Other I/0 configurations including relays, isolated inputs, etc. can be developed on request.
Telematics base board (CG1106-11957)
USB type A
- Allows connection of USB 2.0 HS host devices
- Power switch and over-current protected
USB OTG microAB-type
- Allows connection of USB 2.0 HS host and slave devices
- Power switch and over-current protected
9 pin DB9 serial
- RTS/CTS DSR/DTR flow control
- DCD/RI available on some models of CloudGate (inquire for more details)
- DTE interface
- Supply voltage available via pin 9 (jumper selectable)
3 axis accelerometer
- ±2g/±4g/±8g, 3-Axis, 12-Bit Digital Accelerometer
2 SIM sockets
- Adds SIM backup/roaming SIM functionality to CloudGate
Operating temperature
- -30 to +70°C
Humidity (operational)
- 5 to 95% RH, non-condensing
Storage temperature
- -40 to +85°C
Telematics card with I/O Expander (CG5106-11983)
Telematics card with I/O Expander
- ‘Molex type’ connector, 18 pin
- 5 digital inputs (-/+ 32V)
- 2 analog inputs (0V to 10V, 12 bits resolution)
- 6 digital output (push-pull 0V to 3.3V OR open collector 0V to 30V/250mA@0.5V)
- Auxiliary serial port (RX/TX/CTS/RTS, takes 2 digital inputs & 2 digital outputs)
- 1-wire interface
- 4 GND
Other I/O Expander boards
- Other I/O configurations including relays, isolated inputs, CAN bus, etc. on request.
Telematics card with CAN I/O Expander (CG5106-11984)
Telematics card with CAN bus & I/O Expander
- ‘Molex type’ connector, 18 pin
- 5 digital inputs (-/+32V)
- 2 analog inputs (0V to 10V, 12 bits resolution)
- 4 digital output (push-pull 0V to 3.3V OR open collector 0V to 30V/250mA@0.5V)
- Auxiliary serial port (RX/TX/CTS/RTS, takes 2 digital inputs & 2 digital outputs)
- 1-wire interface
- 4 GND
- CAN bus interface
Other I/O Expander boards
- Other I/O configurations including relays, isolated inputs, etc. on request.
Los clientes que han visto este artículo también vieron