MOXA EOM-G103-PHR-PTP Series
IEC 62439-3 3-port full Gigabit embedded managed redundancy modules
- IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
- 3 SGMII pinouts reserved for PRP/HSR (LAN A/LAN B/Inter Link) and an extra 1 SGMII reserved for Ethernet console connection
- PRP (Parallel Redundancy Protocol): Transmit or receive two independent active paths to/from different LANs simultaneously in a zero recovery time network.
- HSR (High-availability Seamless Redundancy): Every frame is duplicated and then transmitted in both directions of the HSR ring to deliver zero switchover time.
- Hardware-based IEEE 1588v2 PTP (Precision Time Protocol) end-to-end one-step transparent clock for precise time synchronization of networks.
- Configurable via CLI.
The EOM-G103-PHR-PTP series full Gigabit managed redundancy modules are designed for device manufacturers who would like to embed and integrate the advanced IEC 62439-3 supported modules with minimum effort into their products to enhance performance and reliability of certain mission-critical applications.
IEC 62439-3 Clause 4 (PRP) and IEC 62439-3 Clause 5 (HSR) are the newest standardized redundancy protocols for industrial automation networks where zero recovery time is needed. PRP and HSR are suitable for electrical substation automation and other mission-critical applications that cannot tolerate any system downtime.
The EOM-G103-PHR-PTP series modules are compliant with the latest IEC 62439-3 standards and provide an easy and cost-effective integrated solution for adding a redundancy module to a non-IEC 62439-3 supported product. The modules support two IEC 62439-3 Ethernet ports (SGMII (MAC mode) / SERDES (1000Base-X) interface) for constructing PRP or HSR networks and one standard Ethernet port (SGMII (MAC mode) / SERDES (1000Base-X) interface) for connecting with standard IEEE 802.3 Ethernet devices. The EOM-G103-PHRPTP series also provide an extra SGMII (MAC mode) / SERDES (1000Base-X) interface for building up a local access Ethernet console port to easily maintain, control, and manage certain devices right at the local site.
IEC 62439-3 Clause 4 (PRP) and IEC 62439-3 Clause 5 (HSR) are the newest standardized redundancy protocols for industrial automation networks where zero recovery time is needed. PRP and HSR are suitable for electrical substation automation and other mission-critical applications that cannot tolerate any system downtime.
The EOM-G103-PHR-PTP series modules are compliant with the latest IEC 62439-3 standards and provide an easy and cost-effective integrated solution for adding a redundancy module to a non-IEC 62439-3 supported product. The modules support two IEC 62439-3 Ethernet ports (SGMII (MAC mode) / SERDES (1000Base-X) interface) for constructing PRP or HSR networks and one standard Ethernet port (SGMII (MAC mode) / SERDES (1000Base-X) interface) for connecting with standard IEEE 802.3 Ethernet devices. The EOM-G103-PHRPTP series also provide an extra SGMII (MAC mode) / SERDES (1000Base-X) interface for building up a local access Ethernet console port to easily maintain, control, and manage certain devices right at the local site.
Technology
- Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
Software Features
- Management
IPv4 / IPv6, SNMP v1/v2c/v3, Telnet/SSH, LLDP, Flow Control, Back Pressure Flow Control, Port Mirror, Fiber Check, Syslog, RMON
Filter
Multicast Filter Behavior
Redundancy Protocols
PRP/HSR, RSTP Transparent
Security
RADIUS, TACACS+, Trusted Access Control, Authentication Certificate (SSL Certificate, SSH Key Regenerate)
Time Management
SNTP, NTP Server/Client, IEEE 1588v2 PTP
Industrial Protocols
Modbus/TCP
Power Substation
MMS
Interface
- Ethernet Ports
3, SGMII (MAC mode) / SERDES (1000BaseX) (PRP/HSR LAN A/LAN B/INTERLINK)
Connectors
1 connector with 2 x 40 pins, and 1 connector with 2 x 10 pins
Console Port
Ethernet console (SGMII (MAC mode) / SERDES (1000BaseX))
GPIO
3 programmable I/O pins
Power Requirements
- Input Current
Max. 1.625 W @ 3.3 V
Physical Characteristics
- Dimensions
80 x 1.6 x 65 mm (3.15 x 0.06 x 2.56 in)
Weight
28.6 g (0.06 lb)
Environmental Limits
- Operating Temperature
-40 to 60°C (-40 to 140°F)
Note: Products with a higher operating temperature are available by special request.
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
- EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A, CE Class A
Los clientes que han visto este artículo también vieron