MOXA IEX-408E-2VDSL2 Series

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > Mediaconverter > MOXA IEX-408E-2VDSL2 Series

MOXA IEX-408E-2VDSL2 Series

Product is End of Life :
Industrial Managed 6 FE + 2 VDSL2 Ethernet Extender

MOXA IEX-408E-2VDSL2 Series
4735_34108.jpg
4735_10490.png
4735_12577.png
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • VDSL2 high-speed long distance copper connections; up toIEX-408E ethernet extender switch 300 m at 100 Mbps and up to 3 km at 1 Mbps over twisted-pair copper wires
  • Automatic CO/CPE negotiation reduces configuration time
  • Turbo Ring / Turbo Chain on both Fast Ethernet and VDSL2 ports for fast recovery
  • Controllable bypass mode on VDSL2 ports gives higher availability in a daisy chain topology
  • Flexible deployment with 2-pin or RJ11/45 connector on VDSL2 ports
  • Easy network management by web browser, Telnet/serial console, Windows utility, ABC-02, and MXview
The IEX-408E-2VDSL2 is an industrial managed Ethernet extender switch for establishing long distance Ethernet transmissions over twisted-pair copper wiring. IEX-408E-2VDSL2 units can easily be linked in series to form a long distance multi-drop configuration, with one IEX-408E-2VDSL2 unit located at each drop-point. Adjacent drop points can be separated theoretically by up to 3 km, with a transmission speed of 1 Mbps achieved using a VDSL2 connection (with a connection distance of 300 m, a transmission speed of 100 Mbps can be theoretically achieved). Each IEX-408E-2VDSL2 unit provides six 10/100BaseT(X) and two DSL ports, giving users an incredible amount of flexibility for linking together a wide variety of devices separated by vast distances.

Ethernet redundancy is provided by Turbo Ring, Turbo Chain, RSTP/STP, and MSTP, and a state-of-the-art controllable bypass solution on the DSL ports increases the system reliability and availability of your network. The IEX-408E-2VDSL2 series also supports advanced management and security features. It is the perfect solution for reducing the cost of establishing new network cable installations using existing twisted-pair copper wiring to extend copper cable networks beyond the conventional distance limitations imposed by the Ethernet protocol.

With its compact DIN-rail design, the IEX-408E-2VDSL2 series is perfect for use in harsh operating environments with limited installation space, such as ITS, rail wayside, oil and gas, mining, factory automation, and process automation applications. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for installation in industrial applications.

To simplify configuration, the IEX-408E-2VDSL2 uses CO/CPE automatic negotiation (the factory default setting). The device will automatically assign CPE status to one of each pair of IEX devices. In addition, advanced management and monitoring functionalities through NMS, including a virtual panel, improve the user experience by enabling quick troubleshooting.

ProdGrafik

Features and Benefits

    • Command Line Interface (CLI) for quickly configuring major managed functions
    • Automatic CO/CPE negotiation reduces configuration time
    • Standard VDSL2 data rate up to 100 Mbps, with up to 3 km transmission distance (performance varies with line conditions)
    • Turbo Ring and Turbo Chain, RSTP/STP, and MSTP supported on both Ethernet and DSL ports for network redundancy
    • Controllable bypass mode supported in between DSL ports for higher availability in long distance daisy chain topologies
    • Port Trunking on Ethernet and DSL ports for optimum bandwidth utilization
    • IGMP snooping and GMRP for filtering multicast traffic
    • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
    • QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase efficiency
    • Supports EtherNet/IP, PROFINET, and Modbus/TCP protocols for device management and monitoring
    • DHCP Option 82 for IP address assignment with different policies
    • RADIUS, TACACS+, SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
    • Lock port function for blocking unauthorized access based on MAC address
    • Supports SNMP v1/v2c/v3 for different levels of network management
    • RMON for efficient network monitoring and proactive capability
    • Port mirroring for online debugging
    • Automatic warning by exception through e-mail and relay output
    • ABC-02-USB (Automatic Backup Configurator) for system configuration backup/restore and firmware upgrade
    • Easy network management through web browser, Telnet/Serial console, Windows utility, MXview, and ABC-02-USB




Technology
    Standards
    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X) and 100BaseFX
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3z for 1000BaseX
    IEEE 802.3x for Flow Control
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid STP
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1p for Class of Service
    IEEE 802.1X for Authentication
    IEEE 802.3ad for Port Trunk with LACP
    ITU G.993.2 for very high speed digital subscriber line transceivers 2

    Management
    SNMP v1/v2c/v3, LLDP, Syslog, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP. TFTP, SMTP, RARP, Telnet, SNMP Inform, Flow Control, Back Pressure Flow Control

    Filter
    802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP

    Redundancy Protocols
    STP, RSTP, MSTP, Turbo Ringv1/v2, Turbo Chain, Link Aggregation

    Security
    RADIUS, TACACS+, SSL, SSH

    Time Management
    SNTP, NTP Server/Client

    Industrial Protocols
    EtherNet/IP, PROFINET IO, Modbus/TCP

    MIB
    MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9



Interface

    DSL Port
    RJ11 (RJ45 connector) or detachable 2-contact terminal block

    RJ45 Ports
    10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection

    Console Port
    USB-serial console (Type B connector)

    LED Indicators
    PWR1, PWR2, FAULT, STATE, LINK/ACT, CO/CPE, 10/100 (Fast Ethernet port), MSTR/HEAD, CPLR/TAIL, DSL BYPASS

    Alarm Contact
    1 relay output with current carrying capacity of 1 A @ 24 VDC

    Storage Port
    USB storage port (Type A connector)

    Button Reset button

    Digital Inputs
    1 input with the same ground, but electrically isolated from the electronics.
    • +13 to +30 V for state “1”
    • -30 to +3 V for state “0”
    • Max. input current: 8 mA



Switch Properties

    MAC Table Size
    16K

    Packet Buffer Size
    1.5 MB for Fast Ethernet side; 8 KB for DSL side

    Priority Queues
    4

    Max. Number of Available VLANs
    64

    VLAN ID Range
    VID 1 to 4094

    IGMP Groups
    256



Physical Characteristics

    Housing
    Metal, IP30 protection

    Dimensions
    74 x 111 x 135 mm (2.91 x 4.37 x 5.32 in)

    Weight
    LV Models: 1.23 kg
    HV Models 1.26 kg

    Installation
    DIN-rail mounting, wall mounting (with optional kit)

    Altitude
    Up to 2000 m

    Note
    Contact us for products guaranteed to function at higher altitudes.



Environmental Limits

    Operating Temperature
    Standard Models: -10 to 60°C (14 to 140°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

    Storage Temperature
    -40 to 85°C (-40 to 185°F)

    Ambient Relative Humidity
    5 to 95% (non-condensing)



Power Requirements

    Input Voltage
    LV Models: 12/24/48 VDC, redundant dual inputs
    HV Models: 110/220 VDC/VAC

    Operating Voltage
    LV Models: 9.6 to 60 VDC
    HV Models: 88 to 300 VDC, 85 to 264 VAC

    Input Current
    Max. 1 A @ 12 VDC
    Max. 0.48 A @ 24 VDC
    Max. 0.26 A @ 48 VDC
    Max. 0.097 A/0.050 A @ 110/220 VDC
    Max. 0.230 A/0.149 A @ 110/220 VAC

    Connection
    5-pin terminal block

    Overload Current Protection
    Present

    Reverse Polarity Protection
    Present



Standards and Certifications

    Safety
    UL 61010-2-201, EN 60950-1 (LVD) (In plan)

    EMC
    EN 55022/24

    EMI
    CISPR 22, FCC Part 15B Class A

    EMS
    EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV
    EN 61000-4-3 (RS): 80 MHz to 1 GHz: 10 V/m
    EN 61000-4-4 (EFT): Power: 4 kV
    EN 61000-4-5 (Surge): Power: 4 kV; Signal: 4 kV
    EN 61000-4-6 (CS): 10 V
    EN 61000-4-8
    Shock
    IEC 60068-2-27

    Freefall
    IEC 60068-2-32
    Traffic Control
    NEMA TS2 (In plan)

    Rail Traffic
    EN 50121-4 (In plan)

    Vibration
    IEC 60068-2-6

    Note
    Please check Moxa’s website for the most up-to-date certification status.



MTBF (mean time between failures)

    Time
    782,910 hrs

    Standard
    Telcordia (Bellcore), GB





Available Models


Model No. Description
IEX-408E-2VDSL2-LV Managed VDSL2 Ethernet extender switch with 6 10/100BaseT(x) ports and 2 DSL ports, 1 isolated power supply (12/24/48 VDC), -10 to 60 °C operating temperature
IEX-408E-2VDSL2-LV-T Managed VDSL2 Ethernet extender switch with 6 10/100BaseT(x) ports and 2 DSL ports, 1 isolated power supply (12/24/48 VDC), -40 to 75 °C operating temperature
IEX-408E-2VDSL2-HV Managed VDSL2 Ethernet extender switch with 6 10/100BaseT(x) ports and 2 DSL ports, 1 isolated power supply (110/220 VDC/VAC), -10 to 60 °C operating temperature
IEX-408E-2VDSL2-HV-T Managed VDSL2 Ethernet extender switch with 6 10/100BaseT(x) ports and 2 DSL ports, 1 isolated power supply (110/220 VDC/VAC), -40 to 75 °C operating temperature


Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.