MOXA UC-8410A Series
Highly efficient, security-enabled, wireless computing platform that supports a rich set of interfaces
- Freescale LS1021A Coretex-A7 1 GHz dual-core processor
- 512 MB DDR3 SDRAM
- 8 RS-232/422/485 serial ports
- 3 10/100/1000 Mbps Ethernet ports
- Wireless-enabled with PCIe mini slot
- 2 USB 2.0 hosts for mass storage devices
- DIN-rail or wall-mounting installation
- Robust, fanless design
- -40 to 75°C wide temperature model available
- Ready-to-run Debian ARM 8
The UC-8410A Series embedded computers support a rich collection of communication interfaces, including 8 RS-232/422/485 serial ports, 3 Ethernet ports, 1 PCIe mini slot for a wireless module, 4 digital input channels, 4 digital output channels, 1 mSATA slot, and 2 USB 2.0 hosts.
The UC-8410A computer uses the Freescale Cortex-A7 dual-core 1 GHz RISC CPU. This powerful computing engine supports several useful communications functions, without generating too much heat. The built-in 1 GB SD card and 512 MB DDR3 SDRAM give you enough memory to run your application software, and the mSATA slot provides the flexibility of adding additional data storage. The UC-8410A comes with a variety of communication interaces, including serial ports, Ethernet ports, wireless communication slot, and digital input/output channels, making them ideal as communication platforms for industrial applications that require network and device communications.
The UC-8410A Series comes with Linux Debian 8 pre-installed to provide an open software operating system for software program development. This makes the UC-8410A computer an optimal solution for use with industrial applications, but at minimal cost and effort. In addition to the standard model, a -40 to 75°C wide temperature model is also available for harsh industrial environments.
The UC-8410A computer uses the Freescale Cortex-A7 dual-core 1 GHz RISC CPU. This powerful computing engine supports several useful communications functions, without generating too much heat. The built-in 1 GB SD card and 512 MB DDR3 SDRAM give you enough memory to run your application software, and the mSATA slot provides the flexibility of adding additional data storage. The UC-8410A comes with a variety of communication interaces, including serial ports, Ethernet ports, wireless communication slot, and digital input/output channels, making them ideal as communication platforms for industrial applications that require network and device communications.
The UC-8410A Series comes with Linux Debian 8 pre-installed to provide an open software operating system for software program development. This makes the UC-8410A computer an optimal solution for use with industrial applications, but at minimal cost and effort. In addition to the standard model, a -40 to 75°C wide temperature model is also available for harsh industrial environments.
Hardware Specifications
Computer
- CPU
ARMv7 Cortex-A7 dual-core 1 GHz
USB
USB 2.0 hosts x 2, Type A connector
DRAM
512 MB DDR3 SDRAM onboard (up to 1 GB, by CV request)
OS (pre-installed)
Debian ARM 8
Storage
- Main Storage
1 GB SD card for OS
Storage Expansion
mSATA slot
Ethernet Interface
- LAN
Auto-sensing 10/100/1000 Mbps ports (RJ45) x 3
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
- Serial Standards
RS-232/422/485 software-selectable ports (8-pin RJ45) x 8
Console Port
RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
- Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate
50 bps to 115.2 kbps (supports nonstandard baudrates; see user’s manual for details)
Serial Signals
- RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w
Data+, Data-, GND
Digital Input
- Input Channels
- Logic level 0: Close to GND
- Logic level 1: Open
- Logic level 0: +10 to +30 V (COM to DI)
- Logic level 1: +3 V max.
DI x 4
Input Voltage
0 to 30 VDC
Digital Input Levels for Dry Contacts
Digital Input Levels for Wet Contacts
Connector Type
10-pin screw terminal block (4 points, COM, GND)
Isolation
3 kV optical isolation
Digital Output
- Output Channels
4, sink type
Output Current
Max. 200 mA per channel
On-State Voltage
24 VDC nominal, open-drain to 30 V
Connector Type
10-pin screw terminal block (4 points, GND)
Isolation
3 kV optical isolation
LEDs
- System
Power, Ready, Storage, Diagnostic, Wireless signal strength
LAN
100M/Link/Act x 3, 1000M/Link/Act x 3 (on connector)
Serial
TxD x 8, RxD x 8 (on connector)
Reset Button
Supports "Reset to Factory Default and System diagnostics"
Physical Characteristics
- Housing
SECC sheet metal (1 mm)
Weight
1 kg (2.21 lb)
Dimensions
200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in)
Mounting
DIN-rail, wall
Environmental Limits
- Operating Temperature
- Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
- Standard Models: -20 to 75°C (-4 to 167°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Anti-Vibration
2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-Shock
20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
- Input Voltage
12 to 48 VDC (3-pin terminal block)
Input Current
12 to 48 VDC, 1.57 to 0.42 A
Power Consumption
19 W
Standards and Certifications
- Safety
UL 60950-1
EMC
CISPR 22, FCC Part 15B Class A
EN 55022/24
IEC 61000-4-2 ESD: Contact 4 kV; Air 8 kV
IEC 61000-4-3 RS: 3 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Power 0.5 kV; Signal 0.5 kV
IEC 61000-4-5 Surge: Power 0.5 kV; Signal 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61
Reliability
- Alert Tools
Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
Note
The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adapter and cables.
Software Specifications
Linux
- OS
- Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
- GNU C/C++ cross-compiler
- GNU C library
- GDB source-level debugging server
Debian ARM 8
Web Server (Apache)
Allows you to create and manage web sites; supports PHP and XML
Terminal Server (SSH)
SSH allows remote logins to a secure encrypted console from any connected network
Kernel
GNU/Linux 3.12
System Shell: DASH, BASH
Text Editor: vim, nano
File System
Ext2, Ext3, Ext4
Internet Protocol Suite
TCP, UDP, IPv4, IPv6, SNMPv2, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SSH, PPP, SFTP, RSYNC, SSL
Programming Language Support
PHP, Perl, Python
Internet Security
OpenVPN, iptables
Cryptographic Hardware Accelerators
AES, SHA, OpenSSL
Self Diagnosis
Check status of system and hardware component via software method
Linux Board Support Packages (BSP)
GCC C/C++ cross development tool chainBootloader/ Kernel/ filesystem
Cellular Networking
Allows Unix machines to connect to the Internpppd to connect to the Internet. Connect talcomm MSM Interface): Glib-based library for talking to WWAN modems and devices that speak the Qualcomm MSM Interface (QMI) protocol.
Watchdog
Features a hardware function to trigger system reset in a user specified time interval (Linux standard provided)
Application Development Software
Software Protection
Encryption tool for user executable files (based on patented Moxa technology)
Ordering Information | |
Available Models | |
UC-8410A-LX | Cortext-A7 1 GHz dual-core RISC-based computer, 1 GB SD card, 512 MB DDR3L, serial ports x 8, DIs x 4, DOs x 4, LANs x 3, wireless enabled, mSATA slots x 1, USB, Debian ARM8, -10 to 60°C operating temperature |
UC-8410A-T-LX | Cortex-A7 1 GHz dual-core RISC-based computer, 1 GB SD card, 512 MB DDR3L, serial ports x 8, DIs x 4, DOs x 4, LANs x 3, wireless enabled, mSATA slots x 1, USB, Debian ARM8, -40 to 75°C operating temperature |
Optional Accessories (can be purchased separately)
| |
ANT-LTE-ASM-02 | GPRS/EDGE/UMTS/HSPA/LTE, 2 dBi, omni-directional, rubber duck antenna |
| |
ANT-WDB-ARM-02 | 2.4/5.5 GHz 2 dBi dual-band antenna, RP-SMA (male) connector |
| |
CELLULAR-LTE-EU (LE910) | 1 LTE module, 1 antenna with cable and connector, 2 black screws, 1 lock washer, 1 nut, 1 thermal pad |
Wi-Fi-BGN(252NI) | 1 Wi-Fi module, 2 antennas with cable and connector, 2 black screws, 2 lock washers, 2 nuts, 1 thermal pad |
| |
CBL-F9DPF1x4-BK-100 | Console cable with 4-pin connector |
| |
PWR-24250-DT-S1 | Power adaptor |
PWC-C7EU-2B-183 | Power cord with 2-pin connector, Euro plug |
PWC-C7UK-2B-183 | Power cord with 2-pin connector, British plug |
Los clientes que han visto este artículo también vieron