NetModule NB1600 LTE 450 MHz Router
Product is End of Life : 2019-07-12
LTE/UMTS/GSM 450 MHz Router
- LTE450 MHz
- 2 Ethernet ports
- 2 digital inputs & outputs
- USB & RS-232
- Redundant power supply
- DIN rail mounting
- Programmability
The NetModule NB1600 is a powerful and programmable industrial mobile broadband router for remote management, telemetry, condition monitoring, CCTV, ATMs, vending machines and other M2M applications.
For mobile internet access a multiband LTE 450MHz modem is embedded. The best available service is selected automatically.
As a special highlight NB1600 offers two Ethernet ports that are highly configurable. Used as LAN ports they form a two port switch or have separated, routed IP networks. Configured as WAN port, an external modem or land line can be attached in order to add redundancy.
The RS-232 serial interface can act as serial device server or system console. Legacy equipment that does not have any Ethernet or USB port can be hooked up this way. Furthermore, the serial line can be assigned to the SDK and be controlled from there.
The NB1600 has two isolated binary inputs and two relay outputs for direct connection of sensors and actuators. The logic for the inputs/outputs is implemented by the user in the SDK environment on the router.
The USB port enables configuration and firmware update from memory stick. You may also configure it as a device server. Please ask for support of your special USB device.
The router firmware supports common VPN technologies such as IPsec and OpenVPN. Both, server and client mode is possible. Simple handling of a Public key infrastructure makes is easy to connect two NB1600 trough a VPN tunnel.
Further services include DHCP server, DNS proxy server, DDNS agent, SNMP agent, telnet server, SSH server, web server, e-mail client and SMS client. The device is administrated via an easy to use web GUI or the command line interface. Over the air software update is both easy and fail-safe.
Applications
For mobile internet access a multiband LTE 450MHz modem is embedded. The best available service is selected automatically.
As a special highlight NB1600 offers two Ethernet ports that are highly configurable. Used as LAN ports they form a two port switch or have separated, routed IP networks. Configured as WAN port, an external modem or land line can be attached in order to add redundancy.
The RS-232 serial interface can act as serial device server or system console. Legacy equipment that does not have any Ethernet or USB port can be hooked up this way. Furthermore, the serial line can be assigned to the SDK and be controlled from there.
The NB1600 has two isolated binary inputs and two relay outputs for direct connection of sensors and actuators. The logic for the inputs/outputs is implemented by the user in the SDK environment on the router.
The USB port enables configuration and firmware update from memory stick. You may also configure it as a device server. Please ask for support of your special USB device.
The router firmware supports common VPN technologies such as IPsec and OpenVPN. Both, server and client mode is possible. Simple handling of a Public key infrastructure makes is easy to connect two NB1600 trough a VPN tunnel.
Further services include DHCP server, DNS proxy server, DDNS agent, SNMP agent, telnet server, SSH server, web server, e-mail client and SMS client. The device is administrated via an easy to use web GUI or the command line interface. Over the air software update is both easy and fail-safe.
Applications
- Remote management
CCTV
Digital signage
Vending machines
ATMs
Telemetry
Condition monitoring
Mobile / Cellular
- LTE: B3(1800), B7(2600), B20(800), B31(450) - class 3
UMTS(WCDMA FDD): HSDPA/HSPA+ B1(2100), B8(900) - class 3
GSM/GPRS/EDGE: 900MHz class 4, 1800MHz class 1
LTE Data rates: 100 Mbps downlink / 50 Mbps uplink
HSPA+ data rates: 42Mbps downlink / 5.76 Mpbs uplink
No SMS support
Antenna connector: 2x SMA female, receive diversity
WLAN (option)
- IEEE 802.11abgn up to 300 Mbps 2.4/5GHz MIMO
Access Point or Client
Max users in access point mode: WPA: 54, WPA2: 110
Antenna connector: SMA female, supporting one or two antennas
Digital I/O
- 2 digital inputs, level 0 (not set): 0-4.0 VDC level 1 (set): 7.2-40 VDC
2 digital outputs, 0-60 VDC/1A, maximum switching capacity: 60 W
Connector: 8 pins of 15-pin terminal block
Ethernet
- 2 Ethernet ports, 10/100 Mbps, Auto MDX, bridged or routed, RJ45
Third Ethernet port via external USB-Ethernet adapter available
USB
- USB Host interface, type A
Serial
- Protocol: 3-wire RS232
Connector type: 3 pins of 15-pin terminal block
Power
- Redundant power supply inputs
Input voltage: 12V DC to 48V DC (-15% / +20%)
Max. power consumption: 5W
Connector type: 2+2 pins of 15-pin terminal block
Dimensions
- 124.2mm x 45mm x 110mm
ca. 450g
Environment
- Temperature range: -40 °C to +70 °C
Ingress Protection Rating: IP40; MTBF: 226´000h
Safety Standards
- EN60950-1:2006
EMC Standards
- EN301489-1 V1.7.1, EN301489-7 V1.3.1 (Emission)
EN61000-6-2:2005, EN50121-3-2:2006 and EN50121-4:2006 (Immunity)
Type Approvals
- CE according to directive 1995/5/EC (R&TTE)
FCC according to 47 CFR, Part 15
Order numbers:
- NB1600-La
- LTE 450
Los clientes que han visto este artículo también vieron