Advantech EKI-5726I
16GE Unmanaged Ethernet Switch, ATEX/C1D2/IECEx, -40~75℃
- Communicates with SCADA software via Modbus/TCP
- Communicates with NMS (Networking management system) via SNMP
- Port-based QoS for deterministic data transmission
- -40~75°C operating temperature range
- 12 ~48 V DC (8.4~52.8 V DC ) wide-range power input
- EMS level 3 protection for extreme outdoor environments
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Jumbo Frame Support (Up to 9,216 Bytes)
- Supports redundant 12~48 V DC power input and P-Fail relay
- Loop detection
The EKI-5726I is the world’s first convergence switch for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. The EKI-5726I switch uses the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
Communications
Standard
IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
LAN
10/100/1000Base-T(X)
Transmission Distance
Up to 100 m
Transmission Speed
Up to 1000 Mbps
Interface
Connectors
16 x RJ45
6-pin removable screw terminal (power & relay)
LED Indicators
P1, P2, P-Fail, Loop detection
10/100/1000T(X): Link/Activity, Speed
Switch Properties
MAC Table Size
8K
Packet Buffer Size
4.1M bit
Switching Capacity
32 Gbps
Jumbo Frame
9216 bytes
Power
Power Consumption
Max. 8 W
Power Input
12~48 V DC (8.4~52.8 V DC), redundant dual inputs
Fault Output
1 Relay Output
Mechanism
Dimensions (W x H x D)
74 x 120 x 84 mm
Enclosure
IP30, metal shell with solid mounting kits
Mounting
DIN-Rail, Wall
Protection
Reverse Polarity
Present
Overload Current
Present
Environment
Operating Temperature
-40~75°C (-40~167°F)
Storage Temperature
-40 ~ 85°C (-40 ~ 185°F)
Operating Humidity
10 ~ 95% (non-condensing)
Storage Humidity
10 ~ 95% (non-condensing)
MTBF
2,788,343 hours
Certification
Safety
IEC/EN60950, UL60950, UL508, Class 1 Division 2, ATEX
EMI
FCC Part 15 Subpart B Class A, EN 55011/55022
Class A
EMS
EN 61000-4-2 (Level 3)
EN 61000-4-3 (Level 3)
EN 61000-4-4 (Level 3)
EN 61000-4-5 (Level 3)
EN 61000-4-6 (Level 3)
EN 61000-4-8 (Level 3)
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Ordering Information
- EKI-5726I
- 16-port Gigabit Ethernet ProView Switch with Wide Temperature
Los clientes que han visto este artículo también vieron