Advantech EKI-5524MMI
4-port + 2x100FX port (Single/Multi-mode, SC/ST type), Fast Ethernet ProView Switch
- Communicates with SCADA software via Modbus/TCP
- Communicates with NMS (Networking management system) via SNMP
- Port-based QoS for deterministic data transmission
- 8.4~52.8 V DC wide-range power input
- EMS level 3 protection for extreme outdoor environments
- IEEE 802.3az Energy Efficient Ethernet (EEE)
- Jumbo Frame Support (Up to 9,216 Bytes)
- Supports redundant 12~48V DC power input and P-Fail relay
- Loop detection
The EKI-5524SSI/SSI-ST and EKI-5524/MMI/MMI-ST are the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. EKI-5524SSI/SSI-ST and EKI-5524MMI/MMI-ST switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75’C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance.
Communications
Standard
IEEE 802.3, 802.3u, 802.3x, 802.1p, 802.3az, 802.3ab
LAN
10/100Base-T(X), 100Base-FX
Transmission Distance
Ethernet: Up to 100 m
Multi-mode Fiber: Up to 2 km (EKI-5524MMI Series)
Single-mode Fiber: Up to 30 km (EKI-5524SSI Series)
Optical Fiber
Multi-Mode (EKI-5524MMI/MMI-ST)
- Wavelength:1310nm
Tx Power: -14/-20 dBm
Rx Sensitivity: -32 dBm
Parameters: 50/125 um, 62.5/125 um
- Wavelength: 1310 nm
Tx Power: -8/-15 dBm
Rx Sensitivity: -34 dBm
Parameters: 9/125 um
Transmission Speed
Up to 100 Mbps
Interface
Connectors
4 x RJ45 ports
2 x SC/ST type fiber optic connectors
6-pin screw Terminal Block (including relay)
LED Indicators
P1,P2, P-Fail, Loop detection
10/100T(X): Link/Activity, Speed
Switch Properties
MAC Table Size
2K
Packet Buffer Size
1M bit
Switching Capacity
1.2 Gbps
Jumbo Frame
9216 bytes
Power
Power Consumption
Max. 4 W
Power Input
12~48 V DC (8.4~52.8 VDC), redundant dual inputs
Fault Output
1 Relay Output
Mechanism
Dimensions (W x H x D)
43 x 120 x 84 mm
Enclosure
IP30, metal shell with solid mounting kits
Mounting
DIN-Rail, Wall
Protection
Reverse Polarity
Present
Overload Current
Present
Environment
Operating Temperature
EKI-5524SSI/SSI-ST/MMI/MMI-ST: -40~75°C (-40~167°F)
Storage Temperature
-40 ~ 75°C (-40 ~ 167°F)
Operating Humidity
10 ~ 95% (non-condensing)
Storage Humidity
10 ~ 95% (non-condensing)
MTBF
144,890 hours
Certification
Safety
IEC/EN60950, UL60950, UL508, Class 1 Division 2, ATEX
EMI
FCC Part 15 Subpart B Class A, EN 55011/55022 Class A
EMS
EN61000-4-2 (ESD) Level 3
EN61000-4-3 (RS) Level 3
EN61000-4-4 (EFT) Level 3
EN61000-4-5 (Surge) Level 3
EN61000-4-6 (CS) Level 3
EN61000-4-8 (Magnetic Field) Level 3
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Ordering Information
EKI-5524SSI
- 4-port + 2x100FX port (Single-mode, SC type), Fast Ethernet ProView Switch with Wide Temperature
EKI-5524MMI
- 4-port + 2 x100FX port (Multi-mode,SC type), Fast Ethernet ProView Switch with Wide Temperature
EKI-5524SSI-ST
- 4-port + 2 x100FX port (Single-mode,ST type), Fast Ethernet ProView Switch with Wide Temperature
EKI-5524MMI-ST
- 4-port + 2 x100FX port (Multi-mode,ST type), Fast Ethernet ProView Switch with Wide Temperature
Los clientes que han visto este artículo también vieron