MOXA PTC-101 Series
IEC 61850-3 and Railway Ethernet-to-fiber media converters
- 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
- Link Fault Pass-Through (LFP)
- Power failure alarm by relay output (LV model only)
- -40 to 85°C operating temperature range
- Redundant dual DC power inputs (LV model only)
- Integrated high-reliability power supply eliminates the need for external power transformer
- Compliant with EN 50121-4 and essential sections of EN 50155
The PTC-101 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. Models are available with either SC, ST, or LC connectors. The PTC-101 converters eliminate the need for additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing to provide a total solution for your industrial Ethernet networks. The PTC-101 is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration.
Technology
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
Interface
RJ45/M12 Ports
10/100BaseT(X)
Fiber Ports
100BaseFX (SC/ST/LC connectors)
LED Indicators
PWR1, PWR2, Fiber Link, 10/100M (TP port)
DIP Switches
DIP No. | Function | ON | OFF |
1 | Auto Negotiation | Enable | Disable |
2 | Force TP Speed | 100 Mbps | 10 Mbps |
3 | Force TP Duplex | Full Duplex | Half Duplex |
4 | Link Fault Pass Throuth | Enable | Disable |
5 | Operating Mode | Store-and-Forward | Pass Through |
The default setting for all DIP switches is ON.
One relay output with current carrying capacity of 1 A @ 24 VDC (LV model only)
Optical Fiber
100BaseFX | ||
Multi-mode | Single-mode | |
Wavelength | 1300 nm | 1310 nm |
Max. TX | -10 dBm | 0 dBm |
Min. TX | -20 sBm | -5 dBm |
RX Sensitivity | -32 dBm | -34 dBm |
Link Budget | 12 dB | 29 dB |
Typical Distance | 5 km (a) 4 km (b) | 40 km (c) |
Saturation | -6 dBm | -3 dBm |
(a) 50/125 ìm, 800 MHz*km fiber optic cable
(b) 62.5/125 ìm 500 MHz*km fiber optic cable
(c) 9/125 ìm dingle-mode fiber optic cable
Physical Characteristics
Housing
Metal, IP30 protection
Dimensions
152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in)
Weight
Product only: 690 g
Packaged: 875 g
Environmental Limits
Operating Temperature
-40 to 85°C (-40 to 185°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Conformal Coating
Available upon request
Power Requirements
Input Voltage
Power Supply Type | Power Consumption | Fuse Rating | |
LV - DC | 20 to 72 VDC | 170 mA @ 20 VDC | 3.15A(T) 2 |
HV - AC | 85 to 264 VAC | 73 mA @ 85 VAC | 3.15A(T) 2 |
HV - DC | 88 to 300 VDC | 47 mA @ 88 VDC | 3.15A(T) 2 |
Note
- LV-DC compliant with EN 50155 on 48VDC
HV-DC compliant with EN 50155 on 110VDC
Connection
Removable terminal block
Overload Current Protection
1.6 A (protects against two signals shorted together)
Reverse Polarity Protection
Protects against V+/V- reversal
Standards and Certifications
Safety
UL 60950-1
EMC
CE, FCC
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS
EN 61000-4-2 (ESD) Level 4,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 4,
EN 61000-4-5 (Surge) Level 4,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8 (PFMF) Level 5,
EN 61000-4-11
Power Automation
IEC 61850-3, IEEE 1613
Rail Traffic
EN 50155 (essential compliance*), EN 50121-4
Note *Please contact us for details.
Freefall
IEC 60068-2-32
Vibration
IEC-61850-3, IEC-60870-2-2, EN 50125-3 (M12 models only)
Green Product
RoHS, CRoHS, WEEE
Note Refer to the “Environmental Type Tests” table below for more detailed information.
MTBF (mean time between failures)
Time
1,211,613 hrs
Database
Telcordia (Bellcore), GB
Ordering Information
Extended Operating Temperature Models
Model No. | Description |
PTC-101-M-SC-LV | Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with SC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature |
PTC-101-M-ST-LV | Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with ST connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature |
PTC-101-M-LC-LV | Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with LC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature |
PTC-101-S-SC-LV | Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with SC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature |
PTC-101-S-LC-LV | Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with LC connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature |
PTC-101-S-ST-LV | Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with ST connector, dual redundant power inputs (20-70 VDC), -40 to 85°C operating temperature |
PTC-101-M-SC-HV | Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with SC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature |
PTC-101-M-ST-HV | Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with ST connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature |
PTC-101-M-LC-HV | Industrial 10/100BaseT(X) to 100BaseFX media converter, multi-mode with LC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature |
PTC-101-S-SC-HV | Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with SC connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature |
PTC-101-S-ST-HV | Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with ST connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature |
PTC-101-S-LC-HV | Industrial 10/100BaseT(X) to 100BaseFX media converter, single-mode with L connector, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C operating temperature |
Los clientes que han visto este artículo también vieron