Advantech PCIE-1172 & Advantech PCIE-1174

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > Multiport Serial Cards > Advantech PCIE-1172 & Advantech PCIE-1174

Advantech PCIE-1172 & Advantech PCIE-1174

Product is End of Life : 2021-10-22
2-port or 4-port PCI Express Intelligent GigE Vision Frame Grabber

Advantech PCIE-1172 & Advantech PCIE-1174
4819_32686.jpg
4819_10765.png
4819_10766.png
4819_10767.png
4819_10768.png
4819_10769.png
4819_10770.png
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • PCI Express® x4 compliant
  • GoE(GigE Vision Offload Engine), FPGA image reconstruction, No packet loss, No CPU workload
  • GigE Vision, GENiCAM and GENTL compliant
  • Automatic IP configuration
  • 100 m cable length
  • PoE, IEEE 802.3af compliant
  • Direct power from PCIe slot (Total Max. 18W)
  • ToE (Trigger over Ethernet)
The PCIE-1172/1174 series is a PCI Express® dual/quad channel frame grabber for two/four independent GigE Vision cameras. They feature GoE (GigE Vision Offload Engine), PoE(Power over Ethernet) and ToE(Trigger over Ethernet) for high performance, robust and reliable machine vision applications. Unlike conventional NICs (network interface controller) GigE Vision protocol is implemented in software and executed on the host CPU, the processor must spend more resource to handle the network traffic and incoming frames rather than the machine vision algorithms, especially in high bandwidth, multiple camera applications. The GoE feature significantly off-loads the GigE Vision protocols into dedicated FPGA(Field Programmable Gate Array), reconstruct the image then transmit to the Host PC via DMA(Direct Memory Access) in real time, release the host processor resource to execute algorithm and applications and there is no frame or packet loss during the image acquisition. The comprehensive ToE/PoE features can lower the installation/maintenance effort through the single cable connection, and reduce image acquisition latency, with the Ad hoc network feature, the connection between GigE Vision cameras and frame grabber are self-configuring, the user define IP address is no longer necessary, and significantly reduces the installation and maintenance cost and effort.
ProdGrafik

GigE Vision

    Compatibility
    IEEE802.3af

    Speed
    1000 Mbps

    No. of Ports
    2 or 4

    Port Connector
    8-pin RJ45

    Bus Interface
    PCI Express® x4

    Jumbo Frame
    9KB



Digital Input/Output

    No. of Channels
    2 or 4 input and output

    Input/Output range
    0-30V opto-isolated

    Max. frequency
    1KHz

    Digital input interrupt
    Falling and Rising edge, normal and invert



Power Requirements

    Input Voltage
    12 VDC direct from PCIe slot, total Max. 18W or AT/
    ATX System power input

    Overload Current Protection
    Present

    Connection
    AT/ATX Power Jack

    Output PoE Power
    48 V DC PoE Power output



Environment

    Operating Temperature
    0 ~ 50°C (32 ~ 122°F)

    Storage Temperature
    -20 ~ 80°C (-4 ~ 176°F)

    Operating Humidity
    5 ~ 95% RH



Mechanics

    Dimensions (W x D)
    185 x 110 mm (7.3" x 3.9")



  Ordering Information
  PCIE-1172-AE   2-port PCI Express Intelligent GigE Vision Frame Grabber
  PCIE-1174-AE   4-port PCI Express Intelligent GigE Vision Frame Grabber



Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.