Multi-Tech MultiConnect AEW

SPHINX en Europe
ES
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Productos grupos > Modems > Multi-Tech MultiConnect AEW

Multi-Tech MultiConnect AEW

Analog-to-Ethernet/Wireless Converter (MT200A2EW Series)

Multi-Tech MultiConnect AEW
5131_24063.png
5131_24064.png
  • EspecificacionesEspecificaciones
  • DescripciónDescripción
  • Más informaciónesMás informaciónes
  • PDFPDF
  • 3G HSPA+ cellular radio
  • Outbound and inbound calling
  • Certified in North America, European Union, and Australia/New Zealand (Pending)
  • Configurable WAN (Cellular or Ethernet)
  • Set-up wizard
  • Serial port configuration
  • LEDs for visual monitoring of power, signal strength, and phone line status · No RS-232 port for use with external modem
  • Supports packet data and PPP pass-through modes
  • RJ-11 port provides dial tone and DTMF detection
  • Supports analog modem connections from 300 baud to 33.6K bps with error correction and data compression
  • Open VPN with Open SSL Encryption for secure connections
  • Plastic chassis for indoor environments
The MultiConnect® AEW analog-to-Ethernet/wireless converter is a convenient turnkey solution that allows legacy equipment with built-in analog modems to connect to the cellular packet data network. By emulating the traditional dial-up PSTN network and using integrated or external cellular modems, the affordable MultiConnect AEW converter gives new life to devices currently using traditional analog dial-up communications.

KEY BENEFITS

  • Extends the life of legacy dial-up devices by connecting them to cellular or Ethernet internet networks
  • Saves time and money on post purchase industry-specific certifications
  • Analog-to-Ethernet/wireless migration
  • Converts phone number to IP address
  • Connects legacy dial-up devices to cellular or wired Internet network


Applications

The MultiConnect AEW converter is targeted at applications that have an integrated analog modem as part of the solution, but need to utilize the cellular network for connectivity to their host application. Some examples include:
  • Automated teller machines (ATMs)
  • Credit card/POS terminals
  • Home healthcare monitors
  • Kiosks
  • Security systems
  • Industrial automation/utilities


ProdGrafik

SPECIFICATIONS

Model

    MT200A2EW-H5

    Performance
      HSPA+

    Frequency Band (MHz)
      Penta band 850/900/1700/1900/2100 MHz

    Packet Data*
      HSDPA data service of up to 21.0 Mbps
      HSUPA data service of up to 5.76 Mbps

    Circuit Switched Data
      Up to 14.4 Kbps, non-transparent


Power Requirements

    Voltage
      9V to 32V DC @ 400mA


Connectors

    Rf Antenna Connector
      50 ohm SMA (female connector)

    IP Ethernet
      WAN: RJ-45, 10/100 Base T

    SIM Connector
      Standard 1.8 and 3V SIM receptacle

    Dial Connector
      RJ11

    Command Connector
      DE9 (female connector)

    Power
      2.5mm miniature (screw-on)


Physical Description

    Physical Dimensions (L x W x H)
      2.89” x 4.75” x 1.58” (73.4 x 120.6 x 40.1 millimeters)

    Physical Weight
      0.325 lbs (0.147 Kg)

    Chassis Type
      Plastic


Environmental

    Operating Temperature
      -22°to 167° F (-30° to 75° C)

    Storage Temperature
      -40°to 185° F (-40° to 85° C)

    Relative Humidity
      Relative humidity 20% to 90% noncondensing


Certifications

    Regulatory
      FCC Class B (US), R&TTE (EU Economic Area), IC (Canada),ACMA/RCM (AU/NZ), IFT (Mexico)

    Safety
      UL60950-1, cUL60950-1, IEC60950-1, AS/NZS60950-1

    Network
      PTCRB, AT&T



ORDERING INFORMATION



    MT200A2EW-H5

      3G Analog-to-Ethernet/Wireless Converter



    MT200A2EW-H5-WW

      HSPA+ Analog-to-Ethernet/Wireless Converter with Accessory Kit
      Accessory Kit include power supply, antenna and cables


Los clientes que han visto este artículo también vieron
Accept

This website uses cookies to provide the best possible experience. More information.