especificaciones

• Intel Atom N270 CPU 1.6GHz based
  
• Ethernet, serial Interfaces and USB
  
• 4-channel full D1 video encode
  
• H.264 AVC hardware encode
  
• Supports NTSC and PAL video input
  
• One internal 2.5” HDD bay and one CF
  
• Up to 2GB DDR2 400/533 MHz SDRAM
  
• 4 alarm-input and 2 relay-output
  
• 1 RS485, 12V/1Amp DC output
  
• 1 Gigabit Ethernet Interface
  
• Wireless communication capatibility
  
• GPS/3G/WLAN option is posibile
  
• SDK and Software for Windows/Linux

descripción

The LEC-5520 utilizes an onboard H.264 codec chip to convert captured footage into high quality video. This allows the LEC-5520 maximize the amount of video captured onto its single hard drive. Video is captured through 4 BNC analog inputs, allowing the use of cheaper and more reliable analog video cameras.

This platform is built around the 1.6GHz Intel Atom N270 processor which through utilizing less electricity, giving off less heat, allowing the LEC-5520 to be a fanless system- which improves reliability in the field.

Besides the I/O for the DVR, the platform has both HDMI and VGA video outputs. In terms of communication there is gigabit Ethernet, WiFi, 3G mobile communications, and a GPS module for tracking. Additionally, the LEC-5520 includes wide power input range (10-36V), dual power in via DC jack and Phoenix contact, and 12V DC / 1Amp out to power peripherals such as cameras and sensors.

Other hardware specifications include an internal 2.5” hard drive bay, CompactFlash socket, four USB 2.0 ports, two high speed serial UARTs, an RS-485 serial port, alarm/relay, and 1GB DDR2 memory IC onboard (expandable to 2GB via So-DIMM).

Lanner provides a comprehensive SDK and reference software to help customers get started even more quickly. The EyeShot 2000 Control Panel software provides basic features for camera control, PTZ, file storage and streaming, as well as advanced features including motion detection, night detection and scalable video coding. The Eyeshot 2000 Control Panel can be used for evaluation purposes and the completed application, Eyeshot 3000 can also be made available. The system supports Linux and Windows, and the SDK includes features for alarm I/O, streaming, RS-485 control and display.

más informaciónes

Form Factor
Fanless Embedded System
Platform
Processor: Intel Atom processor N270, 1.6GHz
Chipset: Intel 945GSE + ICH7M
FSB: 400/533MHz
BIOS: AMI BIOS 16Mbit Flash ROM
H.264 Video
Compression: H.264/AVC
Video Input: 4 x BNC inputs CVBS 1.0Vp-p, with 75 ohm loading for video input
Resolution: 4 channel Full D1, 720 x 480 NTSC, 720 x 576 PAL
Frame Rate: 120/100FPS (NTSC/PAL)
Audio
Compression: 1 channel G.711
Memory
Technology: DDRII 400/533 SDRAM
Onboard: 1GB DDR2 IC
Max Capacity: 1GB
Audio/Video Inputs
Video: 4 channel video inputs via BNC connectors
Audio: 1 channel audio input via RCA connector
OS Support
Linux, Windows
Storage
Interface: SATA x 1, CF x 1
Bay: 1 x 2.5” HDD bay
Graphics
Integrated Intel graphics core Gen 3.5
Networking
1 GbE NIC
Wireless
3G: HSPA, WCDMA, E-GPRS and GSM
Wi-Fi:802.11 B/G/N with 3dBi SMA antenna
GPS:NMEA-0183 V2.2 with 3 meters SMA antenna
I/O Connectors
BNC: 4 port BNC connectors for video input
RCA: 1 port RCA connector for audio input
USB: 4 ports USB 2.0
Serial: 2 x high speed UARTs
VGA: D-Sub 15 pin VGA port (2048 x 1536)
HDMI: 1 HDMI port (1920 x 1080)
LAN: 1 RJ45 GbE LAN port
Audio: Mic In, Line Out
Alarm Relay and PTZ: One RS-485 for PTZ, 4 alarm-input and 2 relay-output
Expansion:
Mini-PCI: 1
Mini-PCIe: 1

PC Health Monitoring
Temperature: Monitors CPU and chassis environment with trip sensors
LED
Power On LED (Green)
LAN Activity LED (Yellow)
HDD Activity (Yellow)
Buttons
Power Switch
Reset Button
Power
Input: 2 pin Phoenix connector, DC in jack
Input Voltage: DC 10~36V, up to 5 AMP
Environmental Parameters
Operating Temperature: 0 to 45 degrees Celcius
Storage: -20 to 70 degrees Celcius
Relative Humidity: 5% to 95%
Software
Application: EyeShot 2000 Control Panel (Windows XP)
SDK: Linux, Windows
Approvals & Compliance
CE
FCC Class A
RoHS